Features of ANTEC Performance 1 FT ARGB EATX Full Tower Cabinet ( Black )

Temperature Display

By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.

The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.

Attention: The Antec iUinity software must be installed.

ANTEC iUnity

The Antec iUnity provides instant data on PC specs, loads, and usage.

I/O Panel

• Including the mainstream Type-C(10Gbps) port for high-speed transfer.
• Included dust plugs for dust prevention.
• Mic/Audio 2-in-1 port.

4mm tempered glass & perforated solid steel

Left panel adopts tempered glass for better PC showcase visual effects. Right solid panel is bottom-perforated to enhance heat dissipation and ventilation.

Cable Management on Point

Spacious cable management for efficient wire organization.

There are ten sets of velcro straps for easy cable management.

• Three sets of velcro straps for fan & I/O cable routing.
• Five velcro straps for hardware and power supply cables.
• Two velcro straps at the rear for rear I/O cable routing.

Exquisite craftsmanship

Minimal clearance between fan frame and blades, achieving maximum operational efficiency.

Vibration-Absorbing & Anti-Noise Pads

Equipped with eight damping feet to prevent chassis and fan resonance, reducing noise.

Exquisite Steel Mesh

The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.

Best Airflow Path for GPU Cooling

Airflow-enhancing mesh front panel provides massive air.

Ample mesh at the bottom and bottom-right side, and the availability of fans installed on the meshed PSU shroud together provide the best performance for the GPU cooling.

• Top: Magnetic dust filter
• Front: Magnetic & clip-on dust filter
• Bottom: Full-sized pull-out dust filter
• Side: Magnetic dust filter

Supports RTX 40 Series Graphics Cards

Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.

Best Cooling Design

• Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
• Supports 360mm radiators at the front and top simultaneously.
• Up to 10 fans simultaneously.

Modular Drive Trays

Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.

 

Specifications of ANTEC Performance 1 FT ARGB EATX Full Tower Cabinet ( Black )

 

 

Model	Performance 1 FT ARGB
Color	Black
Dimensions	522 x 230 x 522 mm (DWH)
Form Factor	Full Tower
Materials	Steel + Plastic + Glass
Mainboard Support	E-ATX, ATX, Micro-ATX, ITX
Front Access & Controls	Power, Reset , USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, Temp. Display Switch x 1
Side Panel	4mm Tempered Glass(Both Sides)
Drive Bays
Expansion Slots	8
3.5" / 2.5"	45690
2.5"	3
Fan Support
Front	3 x 120mm / 3 X 140mm
Top	3 x 120mm / 3 x 140mm
Power Supply Shroud	3 x 120mm
Rear	1 x 120mm
Included Fan(s)	3 x 140 x 30mm PWM fans in front + 1 x 120 x 30mm PWM fan in rear Pre-installed Storm T3 PWM fan specs vary from the retail version
Radiator Support
Front	120 / 140 / 240 / 280 / 360 / 420mm
Top	120 / 140 / 240 / 280 / 360mm
Rear	120mm
Clearance
Max GPU Length	≤ 400mm
Max CPU Cooler Height	≤ 175mm
Max PSU Length	(Include cable) ≤ 245mm(with HDD) (Include cable) ≤ 440mm(without HDD)
Miscellaneous
Dust Filter	Front / Top / Bottom / Right Side
Net Weight	13.04Kg
Gross Weight	15.26Kg
Warranty	2 Years
Note	*** Features, Price, Specifications are subject to change without notice.